What are the important factors when choosing the best fixer for your oven or range?
The following list should be a good start:
- Do you need an lineman or gas fitter?
- Does the technician have the proper certification?
- Does the organisation have the proper Licenses i.e. electrical contractors license?
- What are their charges?
- What Brands do they service?
- How do their warranties compare?
- Do they have the rights parts on board?
- Are they members of a peak body association?
- Do they have publicised policies and procedures?
Well, seems simple enough, or at to the worst degree if you read enough blogs etc. you will find many variations on the above list stating their method/list/tips are the panacea for your dilemma; how to choose the right fixer!
The reality is immensely different. Most people needing their oven or range repaired don't have time to make a list and methodically check it off before making a booking. Worse still, in little Adelaide you are limited to a handful of truly professional fixers who repair ovens and ranges for a living, where their skills, resources, stock, parts etc match your requirements.
So what can you do that is quick and easy piece still up your chances of acquiring a good fixer? If you don't have time to read the complete article, you can jump to the summary at the end of the article, meanpiece the advice I can give in one sentence is two things: Remember a) most major gizmo fixers will tell you what you want to hear, and b) you only get what you invite... If you're lucky!
However, If you're interested in the scenic version, great, we will revisit some of the bullet points above and hopefully fine tune on your bull-dust radar.
Q. Does the technician have the right certification?
A. Yes Remember most will tell you what you want to hear. But the real answer lies in a long discussion. For example; is your gizmo electric or gas. Then we need to decide if the problem is electrical or gas. Most gas ovens or ranges have electrical systems inside them, which, if the oven or range is hardwired, requires a registered lineman to carry out the repair. If the oven or range has an electrical fault and the unit is not hard wired, then the chances are the average infrigidation mechanic can undertake the repair legitimately. But and isn't there always a but, how do you know if the unit is hardwired? And how do you know if the unit has an electrical or gas fault. Most customers won't know! The reason these clever lists are often not all that helpful is that you have no way of knowing if the fixer has told a white lie or not. In truth, they don't either. They need to see the job before making that judgement. And here is the reason they told you what you want to hear; because most will collect a minimum defrayment at the first visit regardless of whether they can complete the repair or not. The more professional fixer will tell you who you need to call, but for them, the payoff has already been achieved; that being defrayment for the first visit.
Q. What are your charges?
A. Various. Many will state a call out fee, plus a rate. Most call out fees let in some maximum time limit i.e. 1/4 or 1/2 an hour. Some will qualify a fixed charge. Many will exclude the GST. But you, being a switched on individual, googled for a fixer that doesn't charge a call out fee. Well, before you pat yourself on the back too hard, make a point you ask "what the minimum charge will be". Many fixers are responding to the pressures of what we refer to as the "Deal Shoppers" who ring around town and compare prices and select the cheapest price. Those who book a call with the cheapest deal rarely wind up acquiring the best repair. And if they do get a cheap job, there are generally good reasons underpinning that ability, i.e. cutting corners, fitting cheap or second hand parts, not paying insurances, not paying correct wages, not victimisation qualified tradespeople, not being careful to refit covers and alike with all their screws and safety harnesses and the list goes on. Remember, you only get what you invite.
Q. What brands do they service?
A. Your brand! - Because it's what you want to hear! Most will tell you they can service your brand, and mostly that's true. On the other end of the scale are the brand specific fixers who are generally pleased the brands they service as it reflects their status in the industry. They hold it out like a badge of honour and will tell toot sweet if they don't service your brand. Specialists will carry more parts for a given brand, so their chances of complementary a job during the first visit is higher than individual who repairs everything and anything. The compromise for brand specific fixer is the list of gizmos that brand covers i.e. ovens, ranges, washing machines, dishwashers, range-hoods, microwaves, dryers and others. Which means the space for oven or range parts vie with pumps, and motors and seals and timers of the other gizmos. Look for the fixer who specialises in your brand oven or range.
Q. What is your warrant?
A. 12 months! Or at to the worst degree that is the most likely answer, because it's what you want to hear. But this is a complex piece of consumer legislation. There are two facets of warrant, labour and materials. The normal warrant for Labour is 3 months. Both of which the court will throw out the windowpane if it is a matter before them. But these periods serve as a reasonable guide. The catch is in the judgement. If a fixer has to return to a job to repair a recall, how do you judge if the work that was done is the cause or if the cause is a different fault altogether. There is a better than good chance the last mentioned is the case. Those companies that offer thirster warranties know that the chances they will have to cover the cost of repairs under the terms of warrant are very low. In fact, it has the added benefit of acting like a loyalty program. If the warrant extends to say 5 years or 10 years or even a life-time warrant remember you are unlikely to be able to judge if the warrant fault is what was antecedently repaired. So, for the period of the extended warrant you will call the warranting company first in the misguided feeling the work will be done for free, which is true for very few, if any of those return visits. Remember, if it seems too good to be true... it probably is.
Q. Do they have the right parts on board?
A. Yes - Because it's what you want to hear! Service vehicles have limited space, intrinsically high turnover/high profit parts represent the largest volume held. Repairers often qualify the part(s) are commonly held in stock. But that does not mean it is in the van that is hand-picked for your job. No repair company doing major gizmo service work is able to maintain an accurate up up to now van stock. Which means more likely than not, staff taking the booking have no idea what's in the van. Stock held in the van is only one problem, the second is the quality of the part. Elements, thermostats, hinges, door seals, etc. are not made by the brand manufacturer. Elements e.g. are made by dozens of manufacturers, but they generally only make elements. Brand manufacturers purchase their elements from the more respectable suppliers, subject to a contract. However those same elements are also made by copy manufacturers. Some are good quality, some are dubious. But the difference is the price. Cheaper elements can be bought for up to 50% cheaper than the higher quality elements.
Q. Is the fixer a member of an Association.
A. Yes - you guessed it, because that is what you want to hear. Electricians are often members of NECA the National Electrical Contractors Association. The question is, how does that help you qualify the fixer is a bonafide, quality operator? Simple, it doesn't! This group are really about electrical contractors who wire building - big and small. AIA Appliance Industry Australia is probably the main germane association. Sadly in South Australia that will limit you to one fixer, Electrolux. My experience is that the Major Appliance Repair industry is just too small to support the real work necessary to validate a fixer as a bona fide quality operator. Just because the fixer is a member of an association doesn't mean they will be held to a higher standard of repair.
Q. Do they have publicised insurance and procedure.
A. Hopefully yes, but more likely no. However, this is a valid means of up your chances of acquiring a quality fixer. But really who wants to or has time to read a companies insurance and procedure before making a booking. No one. And then there is always the chance that the written documents, if they are made available are marketing tools rather than the method and means by which the fixer operates. Having access to a fixers insurance and procedure is helpful, but only a) you have time to read and understand them and b) if you can verify they conform to them.
SUMMARY
If you can't be daunted reading the long version above, here's the abbreviated version.
- Make sure you qualify the minimum payable charge at the outset. No call out fee, does not mean "Free".
- Fixed price repairs is a valid advantage for simple repairs. Because these fixers need to complete the work inside a limited period of time and visits to remain profitable. They generally limit their time to half an hour on the first job. Generally they do not undertake complex diagnostics or repairs.
- When attractive a fixer who qualifies "Free quotes" make a point the quote is obligation free and that your gizmo stiff in your care. Most fixers who offer free quotes recoup their quotation costs via a margin built into the repair work. However, if you don't proceed with the repairs, a fee is commonly forth coming.
- Ask if there is extra costs if a return visit to fit parts is required. Most fixers have a margin built into the parts, but others don't and add a charge for travel.
- Cheap or second hand parts are impossible for you to screen for. Here you depend on your gut feel and experience. If they drive a beat up old van, wear greasy - torn clothes, look unkempt you can probably expect to get ripped off. But that doesn't mean, just because they come in a clean van all dressed to impress that they are honest quality operators, but generally your chances improve.
- One of the ways technicians shorten their time on the job is to bend covers, leave screws out and generally damage panels that can't be seen. They fail to re-clip or secure cables etc. Again this is difficult to screen for, but can generally be measured by the number of jobs they book a day. 8 calls a day is a fairly busy day. If they do more than 10 jobs a day or complete jobs in 15 minutes or less you can safely assume they are taking short cuts.
- Long waiting multiplication for parts are common in this industry. Some are valid and some are not. Some fixers use parts as a means to improve their programing efficiency. These fixers know you won't wait very long for the first visit, but when they have collected money for the first visit you are committed to wait for the return visit. Try to get a gauge for how long parts will take before making the first booking. This wont overcome the problem, but power help manage your expectations.
Remember... you only get what you invite and only you're lucky. That is a fundamental law of business, as rock solid as the law of gravity. Make sure you know why the differences exist; only then are you ready to make an enlightened decision on repairs.
Finally, being a deal shopper doesn't mean you will get the "best repair". The 'best repair' is inhumed in the fine detail and only those people with lots of time to diligently check of their list of do's and dont's can be confident of acquiring the best deal. Deal shopping is shortsighted and at long las the most likely means to acquiring a shonky repair rather than a quality one. For those of us who are time poor and have better things to do with their life than trawl the net for hours and hours, the best way to be confident of acquiring a good fixer is to look for those fixers who specialise in your brand product, be prepared to pay a fair price and if you are happy with their results tell your friends and hang onto their business card.
